High Volume Rotary Vane Drum Pump with Filter

MSRP: $661.00
$625.00
Exc GST
MSRP: $727.10
$687.50
Inc GST
(You save $39.60 )
In Stock
SKU:
5080AN
UPC:
5080AN
Availability:
Freight charges dependent on destination & quoted after receipt of order. We will source most competitive freight charges for you. Item freight costs to be paid by customer prior to dispatch.
Weight:
15.00 Grams
Adding to cart… The item has been added

Shop With Confidence

usp image

40+ years in the Fuel Industry

usp image

Precision Engineered Products

usp image

Manufacturers Warranty

usp image

Australia Wide Delivery

usp image

Competitive pricing

usp image

SSL Secured site

High Volume Rotary Drum Pump with Filter

This is a great manual drum pump and filtering combination.
Ideal for the fast and efficient transfer of diesel fuel, petrol or kerosene
Flow rates up to 100 L/min. 
Includes 2.4m of fuel resistant hose, 10 micron fuel filter and metal nozzle
Bi-lobe type pump requires minimal maintenance

PLEASE NOTE
Oil gears beforw use.
(SAE 30 oil is recommended for this purpose).

warranty.jpg 

Specifications

Use: Diesel fuel, petrol, kerosene and low viscosity oils up to SAE 30
Discharge Volume: 1 litre per rotation / 100 litres per minute
Inlet/Outlet: Suction Tube: 32mm ID x 1m | Delivery Hose: 25mm ID x 2.2m long
Materials: Cast Aluminium, Buna N Seals

 

 

 

  

Operating instructions

1. Oil Gears Before Use
Before using the 5080AN high volume rotary refuelling pump, make sure that you fill the gear cover with oil. Fill with SAE 30 oil or equivalent to the reference line through the lubrication bolt hole (as indicated on the diagram). Inspect periodically.

2. Revolution Direction
The handle turns in a clockwise direction and the pump discharges one litre per one revolution of the handle.

3. Filter
A filter of #60 mesh polyethylene net is supplied as standard on the pump and is located at the bottom of the suction pipe. Rotating the handle and therefore operating the pump may become harder if the filter is clogged with impurities that may have been filtered out of the fuel or low viscosity oil. It is recommended that you remove the filter periodically and clean it with kerosene.

4. Cautions

  • Suitable liquids include most low viscosity liquids such as diesel, unleaded petrol, kerosene and low viscosity oils. Although the pump can be used to pump other liquids of high viscosity, the pump becomes harder to operate and doing so will shorten the life of the pump & may void the warranty. 
  • Do not use this pump for any solvent or chemical transfer as these liquids will dissolve the Buna N seals and gaskets, etc. (Use the 301-A, 401-A, 733 or 933 for solvents).
  • Please note when pumping fuels like kerosene, petrol or diesel, these products tend to “dry out” the internals of the pump causing parts “to stick” and the pump not to prime and dispense. To stop this from happening and to increase the working life of your pump, we recommend that you lubricate the gears of the pump by dropping a few drops of oil into the pump body by taking off suction pipe (2000-42) & lubricating at this opening. After undertaking lubrication of the pump in such a manner, please rotate the handle a few times. 
  • Do not pump liquids containing dirt or particles such as waste oil. Strained liquids may block the filter, preventing discharge, which can damage the pump interior or cause other problems.
 

Trouble Shouting

Trouble Remedy
Handle fails to turn Gears broken Return for repair. Dirt, etc clogging up the pump - Overhaul & clean. 
Not Priming / Pumping Impeller dry lubricate at down tube / body point, turn handle a few times. 

Handle is hard to turn Dirt, clogging up the pump

Overhaul & clean. Filter blocked - Clean the filter 

Handle turns but no dischargeGears brokenShaft or pin broken

Return for repair